The PTZ Pro supports a wide variety of cameras but with our intelligent Device Cores this universal PTZ controller essentially becomes tailor made for your specific type of camera or cameras. We take great pride in creating the world’s best VISCA controllers for any VISCA camera by implementing the exact feature sets and value ranges of the cameras we support. This takes the controllers far beyond the competition of third party generic controllers but there is even more! Powerful multicamera control, multi-controller control facilitation (two-way data exchange) and access to the full range of Device Cores to mix in access to other broadcast devices such as video routers, monitors and more.
(Due to the milling process, minor surface inconsistencies may occur on the enclosure)
PTZ Pro Features
The PTZ Pro comes in two versions. A Full Edition with access to all Device Cores and access to the full range of configurability within UniSketch OS. This enables you to set up the PTZ Pro just as you would like and provides the awesome feature to configure functionality for other broadcast devices such as video routers, monitors and even video switchers like ATEM and vMix.
The Limited Edition (LE) have a fixed configuration set by SKAARHOJ and will typically only support one Device Core. We have a range of fixed configurations for:
As we continue to expand support, more PTZ cameras will be added to the list. For a Limited Edition of the PTZ Pro the configurability within UniSketch OS, such as setting functionality for each hardware component (buttons, encoders etc.) is not possible.
Both the Full Edition and the Limited Edition comes with great shipping configurations so it will work with your specific PTZ camera type.
A Limited Edition PTZ Pro can be upgraded to the Full Edition with a software purchase upgrade at $999,00 USD
Select this option if you want to control Blackmagic Cameras without the need of an ATEM Switcher. In order to distribute the SDI return feed to multiple cameras you need to use a SDI Distribution unit (or something similar like a VideoHub). This will allow you to distribute the SDI control signal from the Blackmagic Arduino Shield mounted in the PTZ Pro to multiple cameras.
The PTZ Pro w. Blackmagic 3G-SDI Arduino Shield can work either via the Arduino Shield or via IP to the ATEM Switcher. You select which option you want on the configuration page.
The Blackmagic 3G-SDI Arduino Shield supports the following outputs: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.
With the Power over Ethernet option you can communicate and power the PTZ Pro with a single cable (PoE compatible switch/hub required).
Buy a controller ready to work out of the box.
Purchase Options - Full Edition:
Purchase Options - Limited Edition:
You either place your order by PayPal or by email and pay by bank transfer - please read the "Pricing, Terms and Conditions" page for more details.